Working with Oregon State University (OSU), Skidmore, Owings & Merrill (SOM) has been busy testing its design for a timber tower. The time-lapse video shows a section of the wood tower being submitted to 82,000 pounds of pressure.
SOM has been working on the Timber Tower Research Project, funded by the Softwood Lumber Board (SLB) since 2013. The goal of the project is to develop safe, sustainable building technologies using mass-timber. Using timber may reduce a building’s embedded carbon footprint by as much as 60% to 70% compared to benchmark concrete building. The Timber Tower Research Project has developed a structural system called the Concrete Jointed Timber Frame that employs mass-timber elements with reinforced concrete connections.
Since 2014, SOM and OSU have developed a comprehensive physical testing program, which recently completed a full-scale test to prove the system’s ability to satisfy code requirements. The 36-foot by 8-foot specimen is comprised of a Cross-Laminated Timber (CLT) deck topped with a thin layer of reinforced concrete. The concrete is used to improve structural, acoustic, and fire performance. The composite allows for long spans with a relatively thin cross-section. The 82,000 pounds tested is roughly eight times the required design load. Forty-eight sensors recorded stresses as a hydraulic actuator loaded the specimen over two hours.
To see the video visit The Architects Newspaper: https://archpaper.com/2016/08/som-timber-tower-technology/#gallery-0-slide-0