by Web Editor | Sep 18, 2017 | News
A delegation from China’s Ministry of Housing and Urban-Rural Development (MOHURD) visited Tacoma, Washington-based APA-The Engineered Wood Association and toured wood-framed building projects in Seattle on September 11.
The delegation, led by Director General Yu Binyang, was the highest level foreign government group to visit APA in recent years. In addition to APA, the trade visit was hosted by the USDA Forest Service, Forest Products Lab (FPL), located in Madison, Wisconsin.
Representatives from the City of Bellevue, Wash. Planning and Development Department and U.S. Embassy Agricultural Trade Office in Beijing were also present.
The visit comes as China begins to formulate the nation’s timber structure construction development plan as part of the 13th Five-Year Plan for Economic and Social Development. In a meeting held at APA headquarters in Tacoma, Director General Yu Binyang and other MOHURD representatives discussed opportunities and challenges around building with wood in China. Considerations included the importance of sustainability, green building, codes and standards, and further development of trade relations with the U.S.
“We were very pleased to host this Ministerial delegation from the People’s Republic of China,” said APA President, Edward Elias. “The caliber of this mission, in both the quality of participants and content, demonstrates the effectiveness of APA’s efforts to expand the interests of the North American wood products industry within this key Asian market.”
From Woodworking Network: https://www.woodworkingnetwork.com/news/woodworking-industry-news/seeking-greener-construction-chinese-delegates-visit-us-wood?ss=news,news,woodworking_industry_news,news,almanac_market_data,news,canadian_news
by Web Editor | Sep 13, 2017 | News
Alpha Pre-Engineered Panel Expanding Operations To Meet Increased Demand
Alpha Pre-Engineered Panel Systems Inc. wants to expand its Clarington operation. The company manufactures raw and finished wood products for the building industry — including pre-engineered floor, wall and truss systems.
Alpha Pre owns two facilities in Clarington, one on Cigas Road and one on Baseline Road, and has approximately 170 employees.
The demand from the housing industry for Alpha Pre products means the company needs to increase production, according to a letter from Derek Frankfort, general manager of Alpha Pre-Engineered Panel Systems Inc. to Clarington council members. To increase production the company wants to build additions to both its facilities.
“Obviously, the planned expansions of both facilities will require increased plant and office personnel, and many local contractors to aid in the construction,” said Frankfort in his letter to council.
Alpha Pre wants to expand the Baseline Road plant with a 2,000-square-meter addition onto the adjacent lands to the east. The company already owns the land but needs to have it rezoned from Agricultural to General Industrial.
From DurhamRegion.com: durhamregion.com.
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!
by Web Editor | Sep 11, 2017 | News
Thanks to a partnership with the Oregon State University College of Forestry, D.R. Johnson Wood Innovations in Riddle, Oregon, recently became the first U.S. certified manufacturer of cross-laminated timber.
Cross-laminated timber (CLT) is a massive structural composite panel product usually consisting of three to nine layers of dimensional timber arranged perpendicular to each other, much like layers of veneer in plywood and can be used as prefabricated wall, floor and roofing elements in residential, public and commercial structures. It is extremely strong and flexible, making it resilient to seismic activity.
Lech Muszyński, assistant professor of wood science and engineering, first saw CLT in production during his 2009 sabbatical in Austria. He says those facilities were unlike anything he had ever seen.
“I decided to visit as many as I could because the diversity was astounding,” Muszyński says. “I learned that you don’t need to be a big operation to make a difference in the market.”
Once back at OSU, Muszyński began making the rounds to industry partners to gauge their interest in constructing CLT test panels. He had little success until a meeting of the college’s Board of Visitors. Valarie Johnson, president of D.R. Johnson Lumber was in the room.
From Oregon State University: https://www.forestry.oregonstate.edu/osu-dr-johnson-work-together-produce-cross-laminated-timber
by Web Editor | Sep 8, 2017 | News
The U.S. Environmental Protection Agency will issue a final rule that will extend compliance dates for the national Formaldehyde Emission Standards for Composite Wood Products, according to Furniture Today.
“As announced on its website this week, the dates will be amended as follows:
* Emission standards, recordkeeping and labeling provisions from December 12, 2017, to December 12, 2018
* Import certification provisions from December 12, 2018, to March 22, 2019
* Laminated product producer provisions from December 12, 2023, to March 22, 2024
* The conclusion of the transition period for CARB Third-Party Certifiers from December 12, 2018, to March 22, 2019
“On July 11, the EPA also published a direct final rule that would remove a provision that prohibited the early labeling of compliant products before the original December 12 deadline. As it received no adverse comments on this matter, the rule has been changed to allow companies to label compliant products before the new December 2018 deadline. That change became effective August 25, meaning that companies can begin labeling product manufactured by this date.
“The EPA said it has received no negative comments on these changes, which are being finalized as proposed.”
From Floor Daily: https://www.floordaily.net/flooring-news/epa-extends-compliance-dates-for-composite-wood-products
by Web Editor | Sep 6, 2017 | News
Norbord is buying up wood burned by the Gustafsen wildfire. A local logging contractor, Rod Dillman, is the first to begin harvesting in the Gustafsen fire area, says Mike Kennedy, Woodlands Manager with Norbord in an email. He adds that there are some unique challenges logging burned wood.
“According to Rod, a primary challenge in logging the burned wood is the increased maintenance needed on his machines. There is a lot of ash dust which, even more than ‘normal’ dirt, tends to stick to surfaces and must be washed off rather than just wiped. It also makes it necessary to change air filters more frequently. Finally, carbon in the ash is hard on the knives used in the harvesting equipment. Rod also states that they are learning as they go, as this is the first time he has operated in such a large area of scorched timber.”
Kennedy says that luckily there are a few things that have moderated the effect of the fires on the trees, meaning most of the wood is still intact underneath the bark. “Certain species, for example, Douglas-fir with its thick bark, have evolved to withstand the effects of fire, which is a common natural event in the areas where it grows. Fire intensity was not uniform across the landscape, so in many places, trees were scorched on the bark only with minimal damage to the underlying wood. Entire trees are not necessarily affected, with more damage occurring in the bottom portion. It is often possible to buck this out with log processors at the roadside. Processing pressure can be increased to remove most of the severely burned bark or wood.”
They take pride in their adaptability to make the most of the fiber available and are very experienced using dry pine beetle killed wood, he says. “Norbord maintains the highest quality standards for our products and these standards are ensured through third-party certification by APA – The Engineered Wood Association. We have been able to use burned wood in the past.”
From 100 Mile Free Press: https://www.100milefreepress.net/news/norbord-starts-logging-burned-wood/
by Web Editor | Aug 30, 2017 | News
Engineered wood is also known as man-made wood or composite wood, and these are quite popular in recent times due to their cost effective and ecofriendly properties. These woods are formed of composite materials manufactured by binding the strands, fibers and particles all together with the help of suitable adhesives. These engineered woods can be made by utilizing wastes such as sawmill waste, rice straw, sugarcane bagasse, wheat straw and other wood wastes thus making them cost effective and environmentally friendly. Engineered wood is mainly used as a substitute to hardwood and concrete.
In many construction building projects, the products of engineered wood are used as an alternative of steel in beams. One of the advantages offered by engineered wood products is that it can be designed as per the demand and custom specifications of the end user. The main users of engineered wood products are construction developers, architects, designers etc. Promotion of green life and regulations concerning deforestation has led the global engineered wood market to expand with a decent pace.
Government norms and regulations such as Bharat stage emission standards or European emission standards regarding CO2 emissions are driving the market for engineered wood at whole different level. Owing to the factors like cost efficiency, enhanced quality, waste reduction and environmentally friendly nature, the engineered wood market is expected to witness significant growth in the market. There are certain innovations in the technologies and machining systems have been developed in order to improve the efficiency and quality of the products which are expected to further drive growth of the market.
Although the global engineered wood market has potential opportunities in the future still the manufacturers of engineered wood products face some challenges regarding durability and fire resistant properties of engineered wood products. There are certain adhesives like Urea-formaldehyde used in the manufacturing of engineered wood products which are quite toxic. Also some products such as particleboard may not be suitable for outdoor use as they are more prone to humidity. The ongoing developments regarding advanced grading and better material selection techniques is expected to result in improved definition of timber quality and efficient performance of the products.
From LANEWS.org: https://www.lanews.org/growing-industrialization-will-influence-the-engineered-wood-market-growth-2017-2027/
