CLT Creates New Opportunities For Hardwoods

The latest UNECE Forest Products Annual Market Review highlights the rapid growth in the market for cross laminated timber (CLT) and the new opportunities the product creates for wood, including hardwood, to compete in high-end structural applications. Although the first CLT production facilities were constructed in the DACH countries (Germany, Austria and Switzerland) in 1994, the full potential is only now being realized following a long period of technical and market development.

CLT first entered the building market during the 2005 to 2010 period, transforming from a small-scale niche product into large-scale industrial production. CLT panels consist of several layers of structural lumber boards stacked crosswise (typically at 90 degrees) and glued together on their wide faces and, sometimes, on the narrow faces as well. In special configurations, consecutive layers may be placed in the same direction to obtain specific structural characteristics. CLT products are usually fabricated with three to seven layers, but with additional layers in some cases.

Thickness of individual lumber pieces typically varies from 16 mm to 51 mm and width varies from 60 mm to 240 mm. Boards are finger-jointed using structural adhesive. Lumber is visually-graded or machine stress rated and is kiln dried. Panel sizes vary by manufacturer; typical widths are 0.6m, 1.2m, and3 m, while length can be up to 18m and thickness up to 508 mm.

The dimensions and lay-up of CLT production are now internationally standardized and recognized, and production techniques are optimized in modern manufacturing facilities. CLT is designed to maximize yield, utilize lower grades of lumber, and it can be made in a high volume of very large sections.

The result is a light but very strong panel product that can be made off-site and erected quickly to form structural walls, floors and ceilings. CLT is used in a wide range of applications in single-family houses, multi-story towers, public buildings and specialty construction.

From FORDAQ: fordaq.com.

 

Latest News

West Fraser Buys OSB Mill

An oriented strandboard plant in Allendale, SC will now have its third ownership since starting up in 2006. West Fraser Timber Co. Ltd. is purchasing the facility from Georgia-Pacific for $280 million. The Allendale facility has been idle since late 2019 when GP shut it down citing market conditions. The plant has an estimated…

USNR, WFG Sold To Equity Firm

One Equity Partners (OEP), a middle market private equity firm, announced that it has completed the previously announced acquisitions of USNR and Wood Fiber Group. OEP reports it subsequently merged the two businesses, with projected 2021 revenues greater than $500 million…

Lend Me Your Ear

Article by Rich Donnell, Editor-In-Chief, Panel World January 2022 – The staff at Panel World magazine is in full in-person-conference mode in preparation for the eighth Panel & Engineered Lumber International Conference & Expo (PELICE) to be held March 31 to April 1 at the Omni Hotel at CNN Center in Atlanta…

Idaho Producers Supply Mass Timber Arena

Industry stakeholders of all types worked to supply materials for the recently opened ICCU Basketball Arena at the University of Idaho in Moscow. The 4,000 seat facility, which opened in October 2021, incorporates several innovative mass timber elements across some of the longest spans in the country. Designers and engineers…

Pandemic Felt Bad, Profits Felt Good

Article by Rich Donnell, Editor-In-Chief, Panel World November 2021 – Given that Panel World is published six times per year, the November issue before your eyes represents the final issue of 2021. I’ve read through the six issues and pulled a few highlights of what went on in the panel world in 2021 as reported by Panel World…

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!