Composite Panel Association Reports Panel Shipments End Year Slightly Below 2015

The Composite Panel Association’s December Industry Snapshot Report indicates that North American composite panel shipments of particleboard and MDF totaled 5.511 billion square feet for the year 2016, a slight decrease of 0.9 percent below 2015.

December shipments totaled 412 million square feet (MMSF) (3/4-inch basis), down 1.5 percent compared to the same month a year ago.

Particleboard shipments totaled 236 MMSF (3/4-inch basis) in December, and were 3.305 BSF for the year 2016, coming in 1.4 percent below 2015. MDF shipments totaled 176 MMSF (3/4-inch basis) for the month and 2.206 MMSF for 2016, essentially flat compared to 2015.

Capitalization rate for particleboard production was primarily in the 65 to 75 percent range for 2016. Particleboard shipments for both the United States and Canada have remained about the same for the past four years. Shipments are extrapolated based on data received from 95.2 percent of the U.S. industry and 100 percent of Canadian industry.

The Industry Snapshot Report is published by the 15th of each month and is available to members on CPA’s web site. The 2016 North American Shipments and Downstream Market Report will be published in May and provide a comprehensive analysis of industry shipments.

RELATED ARTICLES

CPA FALL MEETING LOCATION CHANGE

DAVID SMITH SERVES AS CPA CHAIRMAN, ’21 BOARD ANNOUNCED

AWC NAMES JACKSON MORRILL PRESIDENT/CEO

ANDY O’HARE NAMED NEW CPA PRESIDENT

 

Latest News

All Said And Done: Fifty Speakers Brought Their Expertise To PELICE

PART FOUR: This is the fourth of a four-part series summarizing the presentations delivered during the Panel & Engineered Lumber International Conference & Expo (PELICE) held this spring and hosted by Panel World in Atlanta March 31 to April 1. The first three parts appeared in the May, July and September issues. PELICE 2024 will be held March 14-15, 2024 again at the Omni Hotel at CNN Center in Atlanta…

Panel Industry Moves Ahead

Article by Rich Donnell, Editor-In-Chief, Panel World November 2022 – As I glanced through the pages of the six issues of Panel World in 2022, various news developments refreshed my memory, but underlying it all was just the fact that business for the most part was conducted as usual. That we were back to…

Plywood Operations Order Lay-Up Lines

Due to the industry-wide challenge to get labor, automation plays a big part in profitable production. This is one of the reasons Richmond Plywood Corp. Ltd. (Richply), Canada, and Tolko Industries…

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!