Georgia-Pacific Camden Plywood Invests $18 Million

It was in the late 1800s when the small community of Camden, Tex., welcomed its first forest products mill. What began as the W.T. Carter Lumber Co. is today one of Georgia-Pacific’s largest plywood operations. To ensure its longevity for years to come, Georgia-Pacific is embarking on a $18 million upgrade that will modernize the plant and help increase efficiency.

The capital improvement plan will focus on three different projects beginning with the plant’s dryer. “We’re rebuilding our dryer, which is more than 40 years old,” says George Standley, Camden Plywood Plant Manager. “The dryer is the heart and soul of plywood operations and is one of the most important stages of production. Controlling veneer’s moisture content is critical to producing a quality product.” The dryer project, supplied by Grenzenbach, is scheduled to be completed in July.

While Grenzenbach is reconditioning the dryer, the facility will also modernize its stenciling and strapping operation. Currently the mill manually stencils and straps. “This area of operation can sometimes slow down the process since an operator has to manually place a stencil on a bundle of plywood, paint it and remove the stencil. This process must be performed several times to ensure that all the required markings are captured clearly,” says Standley. The new automated strapper and stenciling system is currently being installed.

Later this summer, Camden Plywood will wrap up its capital improvement projects with the introduction of its robotic patch system. Currently patching veneer is handled by multiple workers who are stationed on the line. According to Standley, the technology will be operated by four robotic technicians who are now being trained on the system.

From left to right, Edgar Damian, Georgia-Pacific Precision Technician and Robotic System Trainer, and new Robotic Technicians Nathan Clark, Cristine Klenke, and Victoria Nickerson

“Camden Plywood is an example of how plants are being modernized to not only improve production, but to attract, retain and challenge industry employees,” says Standley. “Modern technology can challenge employees and give them the opportunity to grow their careers. By adding robots to our lines, it is our goal to provide more meaningful work which leads to greater job satisfaction.”

Georgia-Pacific’s Camden Plywood employs approximately 500 people and over the next few months more than 100 contractors will be onsite performing the upgrades.

Latest News

Weyerhaeuser Partnership Focuses On Firefighter Mental Health

Weyerhaeuser Co. and Firefighter Behavioral Health Alliance (FBHA) announced an expanded partnership on Fighting Fires Together, a campaign that provides support for wildland firefighters and their families. In its second year, the program is designed to provide resources and increase awareness around the importance of mental health assistance for these first responders…

Fletcher Building Orders Fine OSB Plant

New Zealand’s Fletcher Building Ltd. has ordered a complete plant for the production of Fine OSB from German machine manufacturer Dieffenbacher. The plant will be built at Fletcher Building’s Laminex site in Taupo, in the center of the country’s North Island. The new plant will include Dieffenbacher new belt dryer. The belt dryer is one example of how Dieffenbacher…

Uniboard Modernization On Track At Val-d’Or

Uniboard reports its $350 million particleboard plant modernization program is going as planned at Val-d’Or, Quebec; originally announced in June 2022, this is the third phase of its modernization for its particleboard and TFL mill. More than $100 million was invested in Phase 1 and Phase 2, which were…

Jim Herold Retires From Rainier Veneer

Rainier Veneer, Inc., Spanaway, Wash., announced that Plant Manager Jim Herold retired the first of June after 25 years as manager. Previously Herold worked at Roseburg Forest Products where he was plant manager of the Dillard plywood mill. He began his career at RFP after graduating from Oregon State University in 1974…

Find Us On Social

Newsletter

The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.

Subscribe/Renew

Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.

Advertise

Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!