Georgia-Pacific Camden Plywood Invests $18 Million
It was in the late 1800s when the small community of Camden, Tex., welcomed its first forest products mill. What began as the W.T. Carter Lumber Co. is today one of Georgia-Pacific’s largest plywood operations. To ensure its longevity for years to come, Georgia-Pacific is embarking on a $18 million upgrade that will modernize the plant and help increase efficiency.
The capital improvement plan will focus on three different projects beginning with the plant’s dryer. “We’re rebuilding our dryer, which is more than 40 years old,” says George Standley, Camden Plywood Plant Manager. “The dryer is the heart and soul of plywood operations and is one of the most important stages of production. Controlling veneer’s moisture content is critical to producing a quality product.” The dryer project, supplied by Grenzenbach, is scheduled to be completed in July.
While Grenzenbach is reconditioning the dryer, the facility will also modernize its stenciling and strapping operation. Currently the mill manually stencils and straps. “This area of operation can sometimes slow down the process since an operator has to manually place a stencil on a bundle of plywood, paint it and remove the stencil. This process must be performed several times to ensure that all the required markings are captured clearly,” says Standley. The new automated strapper and stenciling system is currently being installed.
Later this summer, Camden Plywood will wrap up its capital improvement projects with the introduction of its robotic patch system. Currently patching veneer is handled by multiple workers who are stationed on the line. According to Standley, the technology will be operated by four robotic technicians who are now being trained on the system.
From left to right, Edgar Damian, Georgia-Pacific Precision Technician and Robotic System Trainer, and new Robotic Technicians Nathan Clark, Cristine Klenke, and Victoria Nickerson
“Camden Plywood is an example of how plants are being modernized to not only improve production, but to attract, retain and challenge industry employees,” says Standley. “Modern technology can challenge employees and give them the opportunity to grow their careers. By adding robots to our lines, it is our goal to provide more meaningful work which leads to greater job satisfaction.”
Georgia-Pacific’s Camden Plywood employs approximately 500 people and over the next few months more than 100 contractors will be onsite performing the upgrades.
RELATED ARTICLES
Latest News
Huber Takes Another Swing
Huber Engineered Woods appears to be looking at building its sixth OSB plant in Shuqualak, Miss. in Noxubee County. In March, the U.S. Army Corps of Engineers and the Mississippi Dept. of Environmental Quality released a joint public notice for Huber’s application for a permit pursuant to the Clean Water Act, and in May MDEQ released a Large Construction Notice of Intent under the Large Construction General Permit applied for by Huber at Shuqualak…
48 Years Of Westmill & Still Going Strong
Established in 1975, Victor Crondahl started Westmill Industries supplying parts and equipment to the Canadian plywood manufacturing industry. Now, nearly five decades later Westmill continues to grow under its current owner, Mike Crondahl, son of the founder. Westmill has become a world leader in the design and manufacture of veneer drying equipment and technologies. Twenty-five years after Westmill installed the plywood…
Roseburg Makes Major Decision
Roseburg Forest Products, which announced in April a $700 million investment over the next four years to expand operations in southern Oregon, including a $450 million MDF plant in Dillard, Ore., has selected Siempelkamp as the primary supplier of the MDF plant, including a 10 ft. x 42.1 m ContiRoll continuous press. The companies noted that in 1969 Siempelkamp supplied Roseburg Lumber with its very first composite panel press line…
APA Board Adds Beers As Trustee
APA, The Engineered Wood Assn. Board of Trustees has added John Beers III as its newest member. He joins the APA Board of Trustees, filling the position vacated by Andy Konieczka’s resignation and move to a new role within Georgia-Pacific. Beers currently serves as the president of the structural panels business at Georgia-Pacific…
Find Us On Social
Newsletter
The monthly Panel World Industry Newsletter reaches over 3,000 who represent primary panel production operations.
Subscribe/Renew
Panel World is delivered six times per year to North American and international professionals, who represent primary panel production operations. Subscriptions are FREE to qualified individuals.
Advertise
Complete the online form so we can direct you to the appropriate Sales Representative. Contact us today!